Надувные ангары по вашим размерам

Garages for machinery

Mobile and pre-fabricated garages make it possible to reliably store and repair vehicles in conditions comfortable for maintenance. Moreover, pneumatic hangars are built quickly, without additional approvals and property taxes, thereby reducing the cost of maintaining machinery.

Effective area
100 to 10000 sqm
Inner width
10 to 100 m
Inside height
7 to 30 m
Diameter of air spring
1.5 to 4 sqm
Weight of one air spring
70 to 1,550 kg
Pumping system power
1 to 20 kW
Total weight of the pneumatic construction
1.8 to 100 t
Operating temperature
-60 to +70 °C
Wind resistance
up to 45 m/s
Installation time
1 to 7 days
Life of pneumatic hangars
at least 15 years
Material used
reinforced PVC

Design solution

Пневмоангар в разрезе для техники - Ангарстрой
Пневмоангар в разрезе для техники
Our garage is an inflatable structure made of reinforced PVC materials, consisting of forming pneumatic cylinders, end walls equipped with doorways for pneumatic gates, connected into a single structure and covered with a prefabricated shell.
Each pneumatic cylinder is of half-torus design, automatically filled with air using an intelligent booster system. The end walls are equipped with door assembly, pneumatic gates, openings for supply and exhaust ventilation and heat-insulated channels for chimney.
For staff and visitors are provided aluminum doors with closers on a metal frame. Cargo gates open/close using an electric hoist, thus providing pass-through for machinery and equipment.
The pre-fabricated protective shell covers the pneumatic cylinders, providing increased wind and snow resistance, and also improves heat-saving specifications of the structure.

Inflatable garages are modern pneumoframe structures made of reinforced PVC materials. To obtain the desired shape, the structure is filled with air using fans that maintain a constant pressure inside the cylinders.

The construction is complemented by special equipment that maintains a microclimate that is comfortable for cars and other vehicles, as well as for owners, drivers and operators. The possibilities of the material allow the use of such garages in any climatic conditions.

Construction

The main element of inflatable hangar-garages is PVC material, which protects vehicles from the effects of climatic factors. It acquires the desired shape only thanks to special pneumatic cylinders, into which air is pumped. They are absolutely tight, so it is enough to carry out the procedure only once, and then pump them up as needed.

The elements under consideration are interconnected by fasteners into a single structure, from above it is covered with a prefabricated shell. The entire system is controlled by sensors in automatic mode, which indicate to the blowers about the need to pump the structure in a certain area.

In such garages, all technological openings that are relevant for capital analogues are provided, for example, end walls with doorways where pneumatic gates are mounted, as well as windows and points for the exit of the chimney.

A special protective shell not only protects the air springs from external influences, but also protects the entire structure from UV rays, snow and wind. It also has a positive effect on the preservation of heat inside the garage.

Features

Why the hangar-garage has recently been in high demand:

  1. Cost. The price of the construction is much lower when compared with capital analogues, the installation of which requires a full-fledged foundation and very high expenses for the arrangement of walls and ceilings. You will have to spend no less on maintaining the indoor climate.
  2. Comfortable working conditions. The staff stays in a ventilated space in the summer and uses heaters in the winter. Lighting – natural, uniform, but combined with artificial sources for working in the dark. All this has a positive effect on the productivity of employees.
  3. The quality of maintenance is improving. This is relevant for working in places where there is no full-fledged service station nearby, and the equipment performs complex tasks, which is why it constantly breaks down. It is important to fix breakdowns so that the transport can continue to perform tasks and not soon end up in the repair shop.
  4. Zero runs and downtime are reduced. This is the same situation when special equipment and vehicles are sent to remote bases and service stations for periodic maintenance and repair. The pledged resource is spent on pointless moving, because similar tasks can be solved on the spot if you use inflatable garages.
  5. Increases the speed of mobilization. This is true for both rescue workers and military, medical teams or ordinary workers developing the field. In just a few days, you can deploy a full-fledged hangar for storing vehicles in any climatic conditions, and install lifting mechanisms and other equipment for repair and maintenance inside.
  6. The height is sufficient to accommodate large vehicles. The development of modules on an individual project allows you to take into account all the needs of the customer. Such a structure also does not force you to be limited by the available space, since it can be expanded in total by adding several new models. Their weight is small enough that shipping won’t be too difficult.
  7. Best suited for hard-to-reach areas. In some places, it is simply impossible to deploy the construction of a full-fledged garage due to the lack of materials and equipment. Sometimes this is also prohibited by environmental laws, which is relevant, for example, for seismically active areas. Therefore, it remains to use only analogues mounted without a foundation.

This is not a complete list of the advantages of such hangars, but these reasons are enough to make a decision to install a structure and store cars and special equipment in it.

Construction

For hangar-garages, prices depend on the configuration of the structure. There are also elements that cannot be excluded from the design. Among them:

  1. Shell. The main element, on the quality of which all the characteristics of the future building depend. It must withstand climatic influences well, and also be safe for humans and equipment, including in terms of flammability and the environment.
  2. Air control and supply systems. It is important to constantly check the inflated cylinders, since over time the pressure inside drops, which will gradually lead to the collapse of the structure. Therefore, it is necessary that the sensors always monitor the state of the structure and automatically turn on the blowers when necessary.

Specifications

Колеса самосвала

Comfortable working conditions for staff

Thanks to heating, ventilation and air conditioning systems, as well as uniform and bright lighting, our hangars provide comfortable, if not to say luxurious, working conditions for staff. Creating the most favorable conditions for employees affects the quality and speed of workflows.
Ремонт портового крана в ангаре

Improved quality of maintenance

Due to the ever-increasing demand for saving resources and the high cost of equipment, the majority of mining companies takes the control of indoor air cleanliness very seriously with a view to reduce the amount of foreign materials introduced into the machinery through liquids and performs all maintenance and repair operations.
Ангар для морских судов

Suitable for hosting machinery of any size

Thanks to the universal modular structure, our hangars are able to host the largest models of dump trucks, excavators and other types of equipment. Pneumatic structures can have a traditional design with one entrance gate, as well as a layout with two gates to provide a through-traffic.
Ангар мастерская

Reduced downtime and idle run

There is no longer need to move your excavators, dump trucks and drilling rigs to remote facilities for maintenance and repairs. Instead, put your repair shop where the work is done. Thus, you will reduce downtime, idle run, deferred repairs and maintenance, thereby increasing the life of your machinery.
Ангар мастерская

Increased mobilization speed

Your hangar can be dismantled and installed in a new place in a few days, which makes it possible to use the repair shop to carry out maintenance work at all your facilities where necessary. The compact packaging and low weight of the product help reduce transportation costs. When installing, the hangar does not require a large construction team, special equipment or lifting mechanisms.
Ангар для карьерных самосвалов

Indispensable when working in hard-to-reach areas

Our mobile hangars work in locations where no other alternatives exist. Thanks to the compact packaging and low weight of the structure, our customers can deliver structures to the most remote and inaccessible places. Pneumatic hangars can be installed in seismically active areas. Thanks to the inflatable structure, the absence of rigid elements and the foundation, the hangars do not take any damage even with the most severe earthquakes.

Let's calculate the cost of a hangar

Contact us:

+7-908-745-77-77

Whatsapp, Telegram
We’ll be happy to answer you!

If you fill out the questionnaire, we will calculate the cost of the hangar and send you our offer within 24 hours.

How we work

Our experts have been continuously working to improve our solutions. Employees of the company are always ready to provide you with information support and to assist in the installation, repair and operation of pneumatic hangars.

Need a pre-fabricated room?
Consult us!

Reinforced PVC to withstand extreme heat, cold or snow
Quick deployment without a building permit
Lightweight and compact for fast delivery
Simple and easy to move structure with quick installation
The UPS provides operation of the facility in case of shutdown of the regular network
Monitoring system informs about power outage, wind amplification, etc.
Мы используем cookie. Это позволяет нам анализировать взаимодействие посетителей с сайтом и делать его лучше. Продолжая пользоваться сайтом, вы соглашаетесь с использованием файлов cookie.
Понятно

    Рассчитаем стоимость

    Параметры ангара, м

    Ваши контактные данные